Table of Contents
Advertisement
End of segment temperature:
Min: -150.00°C Max:450.00°C
1
Help
6
Menu
Input segment time:
003:00
Hours(max.999):Minutes
1
Help
6
Menu
Temp. tolerance (0=off):
Min:
Help
6
Menu
66
25.
00
2
3
4
7
Screen
8
T
9
set
2
3
4
7
Screen
8
T
9
set
10.
00
0.00°C Max:450.00°C
7
Screen
8
T
9
set
− A new segment is produced by moving
the cell with the black background to a
blank line with the cursor keys and then
pressing the soft key
values of the cell located above it are
automatically copied.
− If the field in the column
black background, the entry mode "End
of segment temperature" is obtained by
pressing the
5
setting, that is the temperature, which the
T
0
thermostat is to achieve on the internal or
fix
external temperature probe.
− Enter the value, confirm with the
and continue to the "Time" entry field with
− If the field in the column
black background, the entry mode for the
"Segment time" time setting is obtained
by pressing the
− If 0 is entered into the field "Time", "------"
appears. Then the final temperature is
approached as quickly as possible. With
a time entry the final temperature is
obtained exactly after the time expires
(ramp).
− Enter the segment time and confirm with
5
the
− Continue to the "Tolerance" entry field
T
0
fix
with
− If the field in the column "Tolerance" has
a black background, the entry mode for
the "Temperature tolerance" is obtained
by pressing the
accurately the end of segment
temperature is to be obtained before the
next segment is processed.
A tolerance which is selected too small
can stop the next segment from being
started according to plan.
− Set the temperature tolerance and
confirm with
T
0
fix
− Continue with
"Pump".
Starting up
Proline Kryomats
Insert . The
T end °C
key. Depending on the
.
Time
key.
key.
.
key. It defines how
.
to the entry field
YAUE0007 / 2/26/2009
has a
key
" has a
Hide quick links:
Advertisement
Table of Contents
