Read Commands (Data Requested From The Thermostat) - Lauda PROLINE Kryomats Series Operating Instructions Manual

Proline Kryomats
Command
Permitted data formats:
-XXX.XX
-XX.XX
-X.XX
-.XX

7.13.6 Read commands (Data requested from the thermostat)

Command
IN_PV_00
IN_PV_01
IN_PV_03
IN_PV_04
IN_PV_05
IN_PV_10
IN_PV_13
IN_SP_00
IN_SP_01
IN_SP_02
IN_SP_03
IN_SP_04
IN_SP_05
IN_PAR_00
IN_PAR_01
IN_PAR_02
IN_PAR_03
IN_PAR_04
IN_PAR_05
IN_PAR_06
IN_PAR_07
IN_PAR_09
IN_PAR_10
IN_PAR_11
IN_PAR_12
IN_PAR_13
IN_PAR_14
IN_DI_01
IN_DI_02
IN_DI_03
IN_DO_01
YAUE0007 / 2/26/2009
− For "_" use also " " (blank character).
− Response from thermostat "OK" or in case of error " ERR_X" (RS 485 interface
e.g. "A015_OK" or in case of error "A015_ERR_X".).
-XXX.X -XXX.
-XX.X -XX.
-X.X -X.
-.X .XX
segments receive this tolerance setting.
-XXX XXX.XX
-XX XX.XX
-X X.XX
.X
Read bath temperature (outflow temperature).
Indication of the controlled temperature (int./ ext. Pt/ ext. Analogue/ ext. Serial).
Read external temperature TE (Pt100).
Read external temperature TE (Analogue input).
Read bath level.
Read bath temperature (outflow temperature) in 0.001 °C.
Read external temperature TE (Pt100) in 0.001 °C.
Read temperature setpoint.
Read current pump power stage.
Read cooling operation mode (0 = OFF / 1 = ON / 2 = AUTOMATIC).
Read current overtemperature switch-off point.
Read current outflow temperature limit TiH.
Read current outflow temperature limit TiL.
Read current value of Xp.
Read current value of Tn (181 = OFF).
Read current value of Tv.
Read current value of Td.
Read current value of KpE.
Read current value of TnE (999 = OFF).
Read current value of TvE.
Read current value of TdE.
Interrogation of the maximum outflow temperature limit.
Read current value of XpF.
Read current value of TnF (181 = OFF).
Read current value of TvF.
Read current value of TdF.
Interrogation of the setpoint offset.
Status of contact input 1: 0 = open/ 1 = closed.
Status of contact input 2: 0 = open/ 1 = closed.
Status of contact input 3: 0 = open/ 1 = closed.
State of Contact output 1:
Starting up
Explanation
XXX.X XXX.
XX.X XX.
X.X X.
Explanation
XXX
XX
X
87