Configuring Arming Time - HIKVISION DS-6300DI-JX Series User Manual

User Manual of DS-6300DI-JX Decoder
Alarm Output Settings
Click Parameter ConfigureAlarm Parameters Alarm Output Settings to enter the following interface:
1.
2. Select the alarm output, you can also customize the output delay time. Output delay time refers to the duration
of the alarm after the alarm output, for example, when you set the alarm output delay time as 10 seconds,
when an alarm occurs the alarming time lasts 10 seconds later than the time of the alarm stopped.
3. Click Save to save your settings.

5.2.5 Configuring Arming Time

Purpose:
Set the time schedule for alarm input and alarm output.
Steps:
1. Click Parameter ConfigureArming Time to enter the following interface:
2. Choose the Start Time and the End Time.
3. Click Save to save the schedule settings.
43