Table of Contents
Advertisement
4 Operation
4.2 Reprocessing with the DAC UNIVERSAL
70
4.2.5
Reprocessing with the Blue lid
The Blue lid is used for the reprocessing of straight and contra-angle
handpieces and turbines.
Tip: If there are many instruments to be reprocessed or to ensure the
instruments will be available again quickly, we recommend using a
second Blue lid.
WARNING
Risk of contamination!
After a reprocessing cycle is canceled, the instruments are not
reprocessed and cross-contamination can occur. Please reprocess
the instruments again.
4.2.5.1
Start cycle with the Blue lid
Preparation
ü All the presettings for the DAC Universal have been made.
ü The DAC Universal is switched on and ready for operation.
ü The maximum number of 6 instruments are ready for reprocessing.
ü The Blue lid is available and cooled down.
1. Place the Blue lid for configuration on the counter or put it in the lid
holder.
2. Plug each instrument onto the corresponding adapter in the Blue lid.
For more information on attaching the instruments or changing the
adapters, see the separate operating instructions for adapters.
3. Turn over the Blue lid so that the instruments are facing
downwards. The blue mark should be pointed towards you.
4. Place the Blue lid at the front of the DAC Universal holder and insert
the Blue lid straight in the holder.
CAUTION
Risk of crushing!
Make sure that your fingers do not get caught between the lid and the
holder.
NOTE
Make sure that the lid is inserted all the way into the holder so that the
instrument heads do not touch the wall of the chamber. Make sure
there are no objects in the chamber. The DAC Universal, the lid and/
or the instruments can be damaged if a lid is not inserted correctly.
CAUTION
Risk of heat!
When you take items out of the chamber, remember that the chamber
and these items can be very hot.
Dentsply Sirona
Operating Instructions DAC Universal
6681006 D3708
D3708.201.01.01.02 04.2019
Hide quick links:
Advertisement
Table of Contents
