Pre-Reprocessing; Initial Start-Up And Longer Breaks In Use; Prior To Starting The Work Day - Dentsply Sirona Midwest Tradition TB Operating Instructions Manual

Operating instructions
66 27 587 D3673.201.02.04.02
4

Pre-reprocessing

4.1

Initial start-up and longer breaks in use

ü
The high-speed handpiece can reach full power only if
specified operating pressures are set [→ 20]. If necessary,
have the pressures checked by a service technician with a star
tester that is placed between the supply hose and the quick
coupling.
➢ Sterilize the high-speed handpiece and accessory parts prior to
startup [→ 46].
NOTE! Never sterilize the quick coupling.
➢
Clean and lubricate the high-speed handpiece after longer
breaks in use.
4.2

Prior to starting the work day

➢ Purge the water and air channels for 30 seconds.
4 Pre-reprocessing
27