Operation; Working With The Touch Monitor; Adjusting The Position Of The Monitor - Dentsply Sirona CEREC Primescan AC Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC Primescan AC, Primescan AC
66 54 573 D3696
D3696.201.01.05.02 09.2019
5

Operation

Working with the touch monitor

5.1
5.1.1

Adjusting the position of the monitor

You can guide the touch monitor to a position convenient for you. In
doing so, there is the option to adjust the height/tilt position and a lateral
pivot.
To move the monitor, on the rear side you will find molds shaped to
one's fingers. To adjust the monitor, always grab into these molds with
both hands at the sides. Single-handed grabbing or grabbing the top/
bottom of the monitor is not intended and may lead to functional
impairment.
5 Operation
5.1 Working with the touch monitor
47