Tape Roll Diameter; Tape Application Leg Length - Standard; Tape Application Leg Length - Optional; Box Board - 3M -Matic 7000r Instructions And Parts List

4-SPECIFICATIONS (continued)
Specifications

4.6 Tape Roll Diameter

Up to 405mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.7 Tape Application Leg Length – Standard
70mm ± 6 mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")

4.8 Box Board

Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C fl ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)

4.9 Box Weight and Size Capacities

A. Box Weight, fi lled: 5 lbs. – 85 lbs. [2.3 kg–38.6 kg]. Contents must support fl aps.
B. Box Dimensions for 7000r Pro and 7000r3 Pro Machines: Inches [mm]
Length
Minimum 6" [152]
Maximum N/A
* Boxes narrower than 8 inches [200mm] may require more frequent belt replacement because of limited
contact area.
To accommodate smaller or larger boxes, machine upper taping head frame and/or outer column assemblies
can be repositioned as described in "Special Set-Up Procedure" section of this manual. Refer to illustration/chart
for box height range possibilities by adjusting machine upper frame and/or outer column positioning.
7000r-7000r3 Pro - NA
A Standard Pos.
Width AG 3 Tape Leg
(i.e. 2 3/4" [70])
6 1/2" [165]*
26 1/2" [673] 26"
®
fi lm tapes.)
B
4 3/8" [111]
[660]
15
Fully Raised Pos.
12 1/4" [311]
36" [914]
2014 June