Preliminary Work; Heater Installation Location - Webasto Thermo Top Evo Installation Documentation

Preliminary Work

WARNING!
- Open the fuel tank cap, ventilate the tank.
- Close the fuel tank cap again.
- Disconnect the battery earth connection.
- Depressurise the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Completely remove the battery.
- Remove the air filter completely.
- Remove the exhaust pipe between the middle and end silencer.
- Remove the fuel tank according to the manufacturer's instructions.
- Remove the fuel-tank sending unit in accordance with the manufacturer's instructions.
- Remove the glove compartment.
- Remove the steering column trim on the driver's side
Remove page 30 "Operating Instructions for End Customer" and add to the vehicle operating instruc-
tions.
1
1318039A_EN

Heater installation location

1 Heater
1
Suzuki Jimny
Installa-
tion loca-
tion
5