Fuses - Mercedes-Benz SL 65 AMG Black Series Operator's Manual

Hide thumbs Also See for SL 65 AMG Black Series:
Table of Contents

Advertisement

230_AKB; 1; 42, en-US
d2ureepe,
Practical hints

Fuses

! The vehicle may be towed only for
distances up to 30 miles (50 km) and at a
speed not to exceed 30 mph (50 km/h).
Towing with all wheels on the ground
G Warning!
If circumstances require towing the vehicle
with all wheels on the ground, always tow
with a tow bar if:
the engine will not run
R
there is a malfunction in the brake
R
system
there is a malfunction in the power
R
supply or in the vehicle's electrical
system
This is necessary to adequately control the
towed vehicle.
Prior to towing the vehicle with all wheels
on the ground, make sure the SmartKey is
in starter switch position 2.
G Warning!
With the engine not running, there is no
power assistance for the brake and
steering systems. In this case, it is
important to keep in mind that a
266
2008-11-27T15:37:19+01:00 - Seite 266
Version: 2.11.7.1
considerably higher degree of effort is
necessary to brake and steer the vehicle.
Adapt your driving accordingly.
X
Make sure the ignition is switched on.
X
With the vehicle at a standstill, depress the
brake pedal and keep it pressed.
X
Shift the automatic transmission into
neutral position N.
X
Release the brake pedal.
X
If engaged, release the parking brake.
X
Switch on the hazard warning flasher
(
Y
page 84).
! The vehicle may be towed only for
distances up to 30 miles (50 km) and at a
speed not to exceed 30 mph (50 km/h).
i
To signal turns while being towed with the
hazard warning flasher in use you can
activate the combination switch for the left
or right turn signal in the usual manner –
only the selected turn signal will operate.
Upon canceling the turn signal, the hazard
warning flasher will operate again.
Fuses
Introduction
The electrical fuses in your vehicle serve to
switch off malfunctioning power circuits.
If a fuse is blown, the components and
systems secured by that fuse will stop
operating.
G Warning!
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system
in question and do not attempt to repair or
bridge a blown fuse. Using other than
approved fuses or using repaired or bridged
fuses may cause an overload leading to a
fire, and/or cause damage to electrical
components and/or systems. Have the
cause determined and remedied by an
authorized Mercedes-Benz Center.
A blown fuse must be replaced by an
appropriate spare fuse (recognizable by its
color or the fuse rating given on the fuse) of
the amperage recommended in the fuse
chart. Any Mercedes-Benz Center will be glad
to advise you on this subject.
i
In case of a blown fuse contact Roadside
Assistance or an authorized Mercedes-
Benz Center.

Advertisement

Table of Contents
loading

Table of Contents