Mercedes-Benz SL 65 AMG Black Series Operator's Manual page 165

230_AKB; 1; 42, en-US
d2ureepe,
Adjusting the rear-axle compression
stage
Rear-axle damper, lower part
Adjustment wrench
1
Adjustment pin
2
Cover
3
X
Remove cover from the damper strut.
3
X
Turn adjustment pin at the top of the
2
piston rod with adjustment wrench 1.
X
Reinstall cover 3.
2008-11-27T15:37:19+01:00 - Seite 163
Version: 2.11.7.1
Adjusting the rear-axle rebound stage
Rear-axle damper, upper part
2-mm hex key
1
Adjustment pin
2
X
Turn adjustment pin at the top of the
2
piston rod with 2-mm hex key 1.
Operation
Suspension
Setting the vehicle level
G Warning!
If you modify the vehicle level, its handling
characteristics will change. This could
cause you to lose control of the vehicle and
cause an accident. You could injure
yourself or other persons seriously or even
fatally. For this reason, always have the
wheel alignment measured anew at an
authorized Mercedes-Benz Center or a
qualified specialist workshop.
! If you change the vehicle level by more
than 0.20 in (5 mm), this will cause caster
and camber values to change, and thus the
wheel alignment of your vehicle, too. For
this reason, have the wheel alignment
measured anew at an authorized
Mercedes-Benz Center or a qualified
specialist workshop. Otherwise your
vehicle's handling characteristics could be
adversely affected and tires could wear
more rapidly.
Z
163