Mercedes-Benz SL 65 AMG Black Series Operator's Manual page 115

230_AKB; 1; 42, en-US
d2ureepe,
Vehicle status message memory
menu
Use the Vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the memory.
Such messages appear in the multifunction
display and are based on conditions or
system status the vehicle's system has
recorded.
The Vehicle status message memory menu
only appears if messages have been stored.
G Warning!
Malfunction and warning messages are
only indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner's and/or driver's
responsibility to maintain the vehicle's
operating safety. Have all required
maintenance and safety checks performed
on the vehicle. Bring the vehicle to an
authorized Mercedes-Benz Center to
address the malfunction and warning
messages.
2008-11-27T15:37:19+01:00 - Seite 113
Version: 2.11.7.1
X
Press button or repeatedly until
è ÿ
the Vehicle status message memory
menu appears in the multifunction display.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the right
multifunction display.
Number of recorded status messages
1
X
Press button or k.
j
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see "Vehicle status messages in the
multifunction display" ( Y page 204).
i After you have scrolled through all
recorded status messages, the first
recorded message appears again.
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunction
display when the SmartKey in the starter
Controls in detail
Control system
switch is turned to position 0 or removed
from the starter switch. With KEYLESS-GO,
the number of messages will reappear when
you turn off the engine by pressing the
KEYLESS-GO start/stop button and open the
driver's door.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you switch off the ignition.
Settings menu
Introduction
In the Settings menu there are two
functions: The function To reset, press
reset button for 3 seconds, with which
you can reset all the settings to the original
factory settings and a collection of submenus
with which you can make individual settings
for your vehicle.
The following settings and submenus are
available in the Settings menu:
Resetting to factory settings
R
( Y page 114)
Submenus in the Settings menu
R
( Y page 114)
Instrument cluster submenu
R
( Y page 115)
Z
113