Mercedes-Benz SL 65 AMG Black Series Operator's Manual page 145

230_AKB; 1; 42, en-US
d2ureepe,
i The COMAND system display indicates
that a Tele Aid call is in progress. While the
call is connected you can change to the
navigation menu by pressing the NAV
button on the COMAND system. Spoken
commands are not available.
A voice connection between the Roadside
Assistance dispatcher and the occupants of
the vehicle will be established.
X
Describe the nature of the need for
assistance.
The Mercedes-Benz Roadside Assistance
dispatcher will either dispatch a qualified
Mercedes-Benz technician or arrange to tow
your vehicle to the nearest authorized
Mercedes-Benz Center. For services such as
labor and/or towing, charges may apply.
Refer to the Roadside Assistance manual for
more information.
Sign and Drive services (USA only):
Services such as a jump start, a few gallons
of fuel or the replacement of a flat tire with
the vehicle spare tire are obtainable at no
charge.
i If the indicator lamp in the Roadside
Assistance button is flashing
p
continuously and there was no voice
connection to the Response Center
2008-11-27T15:37:19+01:00 - Seite 143
Version: 2.11.7.1
established, then the Tele Aid system could
not initiate a Roadside Assistance call (e.g.
the relevant cellular phone network is not
available). The message Call Failed
appears in the multifunction display.
X
Terminating calls: Press button
the multifunction steering wheel.
or
X
Press the respective button for ending a
telephone call on the COMAND system.
Information button
X
Open the storage compartment
( Y page 136).
Information button
1 ¡
X
Press and hold Information button
longer than 2 seconds.
A call to the Customer Assistance Center
will be initiated. The indicator lamp in the
Information button
call is in progress. The message
on
t
Connecting Call will appear in the
multifunction display and the COMAND
system is muted.
When the connection is established, the
message Call Connected appears in the
multifunction display. The Tele Aid system will
transmit data generating the vehicle
identification number, model, color and
location (subject to availability of cellular and
GPS signals).
i The COMAND system display indicates
that a Tele Aid call is in progress. While the
call is connected you can change to the
navigation menu by pressing the NAV
button on the COMAND system. Spoken
commands are not available.
A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be established.
Information regarding the operation of your
vehicle, the nearest authorized Mercedes-
Benz Center or Mercedes-Benz USA products
and services is available to you.
Controls in detail
Useful features
for
¡
will flash while the
¡
Z
143