Memory Function - Mercedes-Benz SL 65 AMG Black Series Operator's Manual

Hide thumbs Also See for SL 65 AMG Black Series:
Table of Contents

Advertisement

230_AKB; 1; 42, en-US
d2ureepe,
i
At low ambient temperatures, the exterior
rear view mirrors will be heated
automatically.
Auto-dimming rear view mirrors
The exterior rear view mirror on the driver's
side and the interior rear view mirror will
respond automatically to glare when the
ignition is switched on and incoming light
from headlamps falls on the sensor in the
interior rear view mirror.
The rear view mirrors will not react if the
automatic transmission is set to reverse gear
R or the interior lighting is switched on.
G Warning!
The auto dimming function does not react
if incoming light is not aimed directly at
sensors in the interior rear view mirror.
Light hitting the mirror(s) at certain angles
(incident light) could blind you. As a result,
you may not be able to observe traffic
conditions and could cause an accident.
2008-11-27T15:37:19+01:00 - Seite 79
Version: 2.11.7.1

Memory function

Notes
With the memory function you can store up
to three different configurations per front
seat.
Each memory position button on the driver's
side can store all of the following settings:
Seat position and lumbar support
R
Steering wheel position
R
Exterior rear view mirrors position
R
G Warning!
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Each memory position button on the
passenger side can store all of the following
settings:
Seat position and lumbar support
R
Multicontour seat: previously saved setting
R
Controls in detail
Memory function
Memory position button
1
Memory button M
2
Storing positions into memory
X
Adjust the seats.
X
On the driver's side, additionally adjust the
steering wheel and exterior rear view
mirrors to the desired positions.
X
Press memory button M.
X
Release memory button M and press
memory position button 1, 2 or 3 within
3 seconds.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.
Z
79

Advertisement

Table of Contents
loading

Table of Contents