Mercedes-Benz SL 65 AMG Black Series Operator's Manual page 249

230_AKB; 1; 42, en-US
d2ureepe,
Have the LEDs and bulbs for the following
lamps replaced at an authorized Mercedes-
Benz Center:
Additional turn signal lamps in the exterior
R
rear view mirrors
Front turn signal lamps
R
High-mounted brake lamp
R
Bi-Xenon lamps
R
Side marker lamps
R
Parking and standing lamps in the tail lamp
R
unit
Brake lamps
R
! Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
2008-11-27T15:37:19+01:00 - Seite 247
Version: 2.11.7.1
Replacing bulbs for front lamps
G Warning!
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in
Xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
It is recommended to have such work done
by a qualified technician.
Before you start to replace a bulb for a front
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M.
X
Open the hood ( Y page 155).
Housing cover for high-beam headlamp,
1
parking and standing lamp
Practical hints
Replacing bulbs
Bulb socket for parking and standing lamp
2
bulb
Bulb socket for high-beam bulb
3
Cable outlet for high-beam bulb
4
High-beam and high-beam flasher bulb
X
Turn housing cover counterclockwise
1
and remove it.
X
Pull out bulb socket 2.
X
Turn bulb socket with the bulb
3
counterclockwise and remove it.
X
Pull the bulb out of bulb socket 3.
X
Gently press the new bulb into bulb socket
3.
X
Insert bulb socket into the guide in the
3
headlamp.
Z
247