Water Connection; Information About The Water Supply - Miele KFNS 37692 iDE Operating And Installation Instructions

Water connection

Information about the water supply


Risk of injury and damage due to
incorrect connection.
Failing to connect the appliance
correctly can result in personal injury
and/or material damage.
The appliance may only be
connected to the water supply by a
suitably qualified technician.

Disconnect the refrigeration
appliance from the power supply
before connecting it to the water
supply.
Turn off the tap before connecting
the refrigeration appliance to the
mains water.

Danger to health and property
due to contaminated water.
The quality of the water used must
conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
Connect the refrigeration appliance
to the drinking water supply.
This appliance meets the requirements
of IEC 61770 and EN 61770.
Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed. All units
and systems used to supply water to
the refrigeration appliance must also
comply with the applicable
regulations in the respective country.
The appliance is only suitable for
connection to a cold water line,
which
– is directly connected to the fresh
water mains in order to ensure
sufficient circulation and therefore
good water quality.
Avoid connection to a water supply
in which the water might stagnate.
This can affect the taste of water and
ice cubes.
– withstands the operating pressure.
– complies with hygiene regulations.
The water pressure must be between
1.5 and 6 bar (150 and 600 kPa).
The stainless steel hose supplied is
1.5 m long and must not be lengthened.
A faulty stainless steel hose must
only be replaced by an original Miele
replacement hose (available from
Miele). The water hose must be
suitable for drinking water.
A tap must be provided between the
stainless steel hose and the household
water supply to ensure that the water
supply can be disconnected if
necessary.
Make sure that the tap is still
accessible after the appliance has
been installed.
Installation
107