Water Connection; Information About The Mains Water Connection - Miele KFNS 7795 D Operating Instructions Manual

Water connection

Information about the mains water
connection

Risk of injury and damage due to
incorrect connection.
Failing to connect the appliance
correctly can result in personal injury
and/or material damage.
The appliance may only be
connected to the water supply by a
suitably qualified technician.

Disconnect the refrigeration
appliance from the power supply
before connecting it to the water
supply.
Turn off the tap before connecting
the refrigeration appliance to the
mains water.

Danger to health and property
due to contaminated water.
The quality of the water used must
conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
Connect the refrigeration appliance
to the drinking water supply.
Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed. All units
and systems used to supply water to
the refrigeration appliance must also
comply with the applicable
regulations in the respective country.
For correct functioning (dispensing rate,
size of ice cubes, noise level) the water
connection pressure needs to be
between 150 kPa and 620 kPa (1.5 bar
and 6.2 bar).
If the water connection pressure
exceeds 620 kPa (6.2 bar), a pressure
reducing valve must be fitted.
The water supply line and the inlet
solenoid valve on the refrigeration
appliance are suitable for a water
connection pressure of up to 1000 kPa
(10 bar).
Use fresh water to ensure that the
quality of the ice cubes remains high.
Connect the hose to the fresh water
supply and avoid connection to a
water supply in which the water
might stagnate.
Only use the hose supplied. Do not
re-use old hoses. The hose must not
be shortened, extended, or replaced
by a different hose.
The hose must only be replaced by
an original Miele spare part. The
hose is available to order from Miele
(see back cover for contact details).
A tap must be provided between the
hose and the mains water connection to
ensure that the water supply can be
disconnected if necessary.
The tap should be easily accessible
after the appliance has been built in.
Installation
23