Miele KFNS 37692 iDE Operating And Installation Instructions page 23

When the refrigerator door is opened,
the interior lighting comes on and the
LED lighting on the adjustable shelves
becomes brighter until it reaches its
maximum brightness.
When the appliance is switched on for
the first time, the sensor for the freezer
section and the alarm symbol  will
flash until the set temperature is
reached.
As soon as the set temperature is
reached, the sensor for the freezer
section will light up constantly and the
alarm symbol  will got out.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it. Do
not place food in the freezer section
until the temperature is at least
-18 °C.
Switching on and off
Individual settings can be set for each
cooling zone.
 Touch the sensor for the zone in
which you want to adjust the settings.
The selected sensor lights up yellow.
You can now select the SuperCool
function or adjust the temperature for
the refrigerator section.
The SuperFreeze function can be
selected or the temperature can be
adjusted for the freezer section.
Please refer to the relevant section of
this booklet for more information.
If another cooling zone is selected, the
settings for the previously selected
zone will remain as they were.
23