Miele KFNS 37692 iDE Operating And Installation Instructions page 28

The correct temperature
The following information appears in the
display while the sensors are being
touched:
– When first tapped: The last
temperature selected flashes.
– Each subsequent touch of a sensor:
The temperature is adjusted in 1 °C
steps.
– Leaving a finger on the sensor
changes the temperature
continuously.
Approximately 5 seconds after you
release the sensor, the actual
temperature in the appliance will be
displayed.
Or
 Touch OK to confirm your selection.
28
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display, as it will take this long for the
appliance to give an accurate reading.
 If, after this time, the temperature is
still too high or too low, you will need
to adjust it again.
Temperature range
The temperature can be adjusted:
– in the refrigerator section from 3 °C to
9 °C.
– in the freezer section from -15 °C to
-26 °C.