Miele KFNS 37692 iDE Operating And Installation Instructions page 71

Problems with the ice cube maker
Problem
You cannot switch the
ice cube maker on.
The ice cube maker is
not producing any ice
cubes.
The ice cube maker is
only producing small
ice cubes.
Possible cause and remedy
The appliance is not connected to the power supply
or is not switched on.
 Reconnect to the mains and switch the appliance
back on.
The appliance or the ice cube maker is not switched
on.
 Switch on the appliance and the ice cube maker.
The water supply is not open or has not been vented.
 Open the water supply.
 Check whether the water supply has been vented.
The drawer of the ice cube maker is not closed
properly.
 Push the drawer all the way in.
The appliance door has been opened too frequently,
causing the compressor to turn on more often and
the ice-cube maker has iced up.
 Only open the door when necessary and for as
short a time as possible.
The temperature in the freezer section is too high.
 Set a lower temperature.
The water pressure is too low.
 Check whether the water pressure is between
1.5 bar (150 kPa) and 6 bar (600 kPa).
Remember that it can take up to 24 hours to
produce the first ice cubes.
The size of the ice cubes depends on the quantity of
water being taken in. You can set this quantity
according to your wishes.
 To make larger ice cubes, increase the amount of
water being taken in by the ice cube maker.
Problem solving guide
71