Miele KFNS 37692 iDE Operating And Installation Instructions page 100

Installation
Securing the appliance in the niche
 Press the appliance against the side
of the housing unit on the hinge side.
 Screw the chipboard screws 
through the hinge plates in the order
shown to secure the appliance to the
housing unit.
100
 Push the loose fixing brackets against
the housing unit wall.
 Secure the fixing bracket  to the
housing unit side wall with the
screw .
Useful tip: Pre-drill the hole.
The appliance must not pull back
into the unit, as otherwise the gap of
42 mm will not be maintained all the
way round.
Using your thumb, push the
protruding bracket towards the
housing unit wall whilst tightening
the screws.
 Secure the fixing bracket  to the
housing unit side wall with the
screws .
Useful tip: Pre-drill the holes.
 Re-tighten screws  and .