Close the covers.
Push the appliance about two thirds
of the way into the building-in niche.
When pushing the appliance into its
niche make sure that the mains cable
does not get trapped.
Useful tip: To help you push the
appliance into position, tie a piece of
string around the plug to "increase" the
length of the connection cable.
Then pull the cable by the end of the
string through the housing unit. This
way it will be easier to connect it once
the appliance is in the unit.
With 16 mm thick unit walls:
Clip the spacers and on the
right hand side of the hinges.
Open the appliance doors.
Installation
97