Adjusting The Bottle Rack; Perfectfresh Pro Zone Drawers - Miele KFNS 37692 iDE Operating And Installation Instructions

Adjusting the interior fittings

Adjusting the bottle rack

The bottle rack is available as an
optional accessory (see "Guide to the
appliance - Optional accessories").
The bottle rack can be placed on
different levels in the appliance.
 Raise the rack and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The stop bar at the back must face
upward to prevent the bottles from
touching the back wall.
The bottle rack has stoppers at the
sides to prevent it from being pulled
out unintentionally.
46

PerfectFresh Pro zone drawers

The drawers in the PerfectFresh Pro
zone sit on telescopic runners and can
be removed for filling, emptying or
cleaning purposes:
Remove the bottle shelf from the door
to make it easier to take out the
drawers.
 Pull the drawer out as far as it will go.
 Holding the sides of the drawer at the
back, lift it up and then pull it
forwards and out.
Push the runners back in to avoid
injury or damage.
 Carefully pull the lid between the
drawers slightly forwards, then take it
down and out.