Adjusting The Interior Fittings; Adjusting The Door Shelf/Bottle Shelf; Adjusting The Bottle Holder; Moving An Adjustable Shelf/Adjustable Shelf With Lighting - Miele KFNS 37692 iDE Operating And Installation Instructions

Adjusting the door shelf/bottle
shelf
Only move door/bottle shelves when
they are empty.
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
 Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.

Adjusting the bottle holder

The bottle holder can be moved to the
left or right to create more room for
drink cartons.
The bottle holder can be removed
completely, e.g. for cleaning:
 Lift up the bottle shelf and pull it
towards you to remove it.
 Detach the bottle holder from the
back edge of the bottle shelf.

Adjusting the interior fittings

Moving an adjustable shelf/
adjustable shelf with lighting
By adjusting the position of an
adjustable shelf with lighting in the
refrigerator, you can change the
illumination in this section according to
your needs.
Stoppers prevent the shelves from
being dislodged by mistake.
 The shelves can be adjusted
according to the height of the food.
1. Lift the shelf up slightly at the front.
2. Pull it forwards a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
 Push the shelf in until it clicks into
position.
The raised edge on the protective strip
at the back must face upward to
prevent food from touching the back
wall of the appliance and freezing to it.
45