Miele KFNS 37692 iDE Operating And Installation Instructions page 74

Problem solving guide
Problem
The LED lighting on one
of the adjustable
shelves is not working.
74
Possible cause and remedy
The shelf has not been positioned correctly on the
shelf supports.
 Check that the shelf is positioned correctly on the
shelf supports. The shelf has a metal disc
(contacts) at the front left corner which supplies
power to the LED lighting.
 Push the shelf in until it clicks into position.
The metal disc is not clean and dry.
 Clean it with a damp cloth and then dry with a lint-
free cloth.
The LED lighting on the stainless steel strip is faulty.

Risk of electric shock due to exposed, live
electrical components!
When removing the lighting cover, there is a risk of
coming into contact with live electrical
components.
Do not remove the lighting cover. The LED lighting
must only be repaired or replaced by a qualified
technician.

Danger of injury from LED lighting!
This lighting corresponds to risk group RG 2. If the
cover is defective, the eyes may be injured.
If the lighting cover is defective, do not look from a
close range directly into the lighting with optical
instruments (e.g. magnifying glass or similar).
 Replace the adjustable shelf with LED lighting. A
replacement is available from Miele.