Before Installing The Appliance - Miele KFNS 37692 iDE Operating And Installation Instructions

Weight of the furniture door

If the door panel is too heavy,
this can cause damage!
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent
functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
The maximum permitted weight of the
furniture doors is in kg:
Appliance
KFNS 37692
iDE
To fit large or segmented furniture
doors, a mounting kit or another pair
of fixing brackets can be ordered from
Miele.
Upper Lower
door door
17 12

Before installing the appliance

 Take the accessory pack which
includes installation parts and other
accessories out of the appliance and
remove the packaging strap holding
the door in place.
 Do not remove the following from
the rear of the appliance:
– The spacers (depending on model).
These ensure that the gap required
between the back of the appliance
and the wall is maintained.
– The bags (depending on model)
located inside the metal grille (heat
exchanger).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and not
dangerous.
 Remove any cable clips from the
back of the appliance.
 Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Installation
85