General
Device concept
Functional princi-
The central control and regulation unit of the power sources is coupled with a digital signal
ple
processor. The central control and regulation unit and the signal processor control the en-
tire welding process.
During the welding process, the actual data is measured continuously and the device re-
sponds immediately to any changes. Control algorithms ensure that the desired target
state is maintained.
This results in:
-
-
-
Application areas
The devices are used in trade and industry for manual applications with classical steel, gal-
vanised sheets, chrome/nickel and aluminium.
The integrated 4-roller wire drive, high performance and low weight of the power source
makes it the ideal choice for portable applications on building sites or in repair workshops.
a precise welding process
exact reproducibility of all results
excellent weld properties.
The TPS 270i C MIG/MAG power source is
a completely digitised, microprocessor-
controlled inverter power source with integ-
rated 4-roller wire drive.
The modular design and potential for sys-
tem add-ons ensure a high degree of flexi-
bility.
Its compact design makes the TPS 270i C
particularly suitable for mobile applications.
The power source can be adapted to any
specific situation.
21