Ev Charger And Ev Charger Cable Specifications - SolarEdge SE5000H-AU Installation Manual

Technical Specifications - EV Charging Single Phase Inverter - (Australia)

EV Charger and EV Charger Cable Specifications

NOTE
The EV Charging inverter and EV Charger cable are ordered separately.
OUTPUT- AC (EV CHARGER)
Charging Mode
Minimum charge rate
Rated AC Power Output(grid &
(2)
PV)
Nominal AC Output Voltage
Nominal AC Frequency
Maximum Continuous Output
Current @230V
Residual Current Detector (AC)
ADDITIONAL FEATURES
EV Charger Status LEDs, Fault
Indicator
EV Charger Ground Connection
Monitoring
EV Charger Configuration
EV Charger Unplugging
Detection
STANDARD COMPLIANCE
Safety
EV Charger
INSTALLATION SPECIFICATIONS
EV Charger Connector
EV Charger Cable Length
(1) Minimum charge rate is in compliance with IEC61851-1 and J1772™ FEB2016 standards.
(2) Minimum charge rate 1.5 kW
(3)
Cellular connection may be used; requires a SIM card with a 1GB data plan that should be
purchased from a cellular provide
(4)
EV Charger cable ordered separately.
EV Charging Single Phase Inverter MAN-01-00629-1.2
Connection to the SolarEdge monitoring
platform is required for first EV charging
(1)
Via the monitoring app; Ethernet or Wi-Fi
Yes, current termination according to IEC
(4)
r
AC Mode 3
1.5
7400
230
50 / 60
32
30
Yes
Yes, continuous
connection is required
62196
IEC 61851, IEC 62752:2016
IEC 62196
IEC 62196 Type 1 /Type 2
7.6 (4.5 option)
86
kW
W
Vac
Hz
Aac
mA rms
(3)
m