Table of Contents
Advertisement
23
Chapter 3: Installing the Inverter
Chapter 3: Installing the Inverter
Install the inverter either before or after the panels and power optimisers have been
installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it
may damage them. To rest the inverter on the ground, lay it on its back, front
or side.
Inverter Package Contents
One inverter with Connection Unit with Safety Switch
Two Allen screws for fastening the inverter to the mounting bracket
Connection Unit with Safety Switch sealing cover (if applicable, for use in case of
inverter replacement)
Installation guide
Identifying the Inverter
Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the monitoring platform.
Inverter Interfaces
The following figures show the inverter and Connection Unit with Safety Switch
connectors and interfaces.
Figure 5: Inverter and Connection Unit with Safety Switch interfaces
EV Charging Single Phase Inverter MAN-01-00629-1.2
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
