Step 1: Mounting The Power Optimisers - SolarEdge SE5000H-AU Installation Manual

19 Step 1: Mounting the Power Optimisers
When installing panels in a confined space, for example, if installing Building-
integrated photovoltaic (BIPV) panels, ventilation measures may be needed to
ensure the power optimisers are not be exposed to temperatures outside their
specifications.
NOTE
The images contained herein are for illustrative purposes only and may vary
depending on product panels.

Step 1: Mounting the Power Optimisers

For each of the power optimisers
1. Determine the power optimiser mounting location and use the power
optimiser mounting brackets to attach the power optimiser to the
support structure . It is recommended to mount the power optimiser
in a location protected from direct sunlight. For frame-mounted
power optimisers follow the instructions supplied with the optimisers,
or refer to https://www.solaredge.com/sites/default/files/installing_frame_
mounted_power_optimizers.pdf.
2. If required, mark the mounting hole locations and drill the hole.
(1) Not applicable to smart panels.
Figure 3: Power optimiser clearance
(1)
:
EV Charging Single Phase Inverter MAN-01-00629-1.2