Table of Contents
Advertisement
The warning icon
is removed from the status bar. It is also
removed from the Warning field.
Tip: You can swipe left or right to temporarily remove the
warning icon via notification center.
Related topics:
• Investigating warnings
• Control center and notification center
Rebooting your phone
Improper operation may cause malfunction. If a malfunction
occurs, your system administrator may ask you to reboot
your phone.
Procedure:
1. Navigate to Settings > Advanced Settings (default
password: admin) > Reboot > Reboot. The phone screen
prompts you whether to reboot the phone
2. Tap OK to reboot the phone
Resetting to factory settings
Your system administrator may ask you to reset your phone to
factory configurations after you have tried all troubleshooting
suggestions but still have not solved the problem. This
operation will delete all your personal configuration settings,
and reset all settings to the factory defaults.
Procedure:
1. Navigate to Settings > Advanced Settings (default
password: admin) > Reset Config
2. Tap Reset to Factory Settings. The phone screen prompts
you whether to reset the setting
3. Tap OK
The phone begins resetting.
Tip: Long-tap (five seconds) the Mute button on the device.
Then tap OK on the "Reset to Factory Setting" prompt.
After reset, the screen will display "Initializing..." The phone will
be reset successfully after startup.
Note: Reset of your phone may take a few minutes. Do not
power off until the phone has started up successfully.
Updating the phone configuration
Your system administrator may ask you to update your
phone configurations.
Procedure:
1. Navigate to Settings > Advanced Settings (default
password: admin) > Auto Provision
2. Enter the provision information in the corresponding field
3. Tap
. The phone screen prompts you whether to
provision now
4. Tap OK
Chapter 12: About One Talk
One Talk, together with its related devices, software and
applications ("Service" or "One Talk"), is a business telephone
solution that brings together the functions of desk phones and
mobile devices (smartphones and tablets) into a unified
system, with all devices sharing the same communication
features (see verizonwireless.com/support/one-talk-features/
for a listing of features available with the Service).
Technical support
For additional information, please visit the One Talk support
website (verizonwireless.com/support/one-talk), where you
can find additional documentation and answers to the most
frequently asked questions.
Important customer information
To avoid electric shock, use caution when connecting cables.
For example, do not connect safety extra-low voltage (SELV)
circuits to telephone-network voltage (TNV) circuits. LAN ports
contain SELV circuits, and WAN ports contain TNV circuits.
Some LAN and WAN ports both use RJ-45 connectors.
To avoid electric shock, do not operate the product or connect
or disconnect cables during electrical storms. To avoid electric
shock, do not use this product in or near water.
To reduce the risk of fire or overheating, keep this product in
well-ventilated areas, away from radiators or other heat
sources. Do not block cooling vents.
The plug-socket combination must be accessible at all times
because it serves as the main power-disconnecting device.
Use only the manufacturer-provided AC adaptor approved for
use with this product. Use of another AC adaptor may cause a
fire or explosion.
This product relies on short-circuit (overcurrent) protection
installed in your home or office. Ensure that a fuse or circuit
breaker no larger than 120 VAC, 15 A U.S. is used on the phase
conductors (all current carrying conductors).
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
1. When the power cord or plug is damaged or frayed
2. If liquid has been spilled into the product
3. If the product has been exposed to rain or water
4. If the product does not operate normally when the
operating instructions are followed. Adjust only those
controls that are covered by the operating instructions,
since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal condition
User guide
51
Advertisement
Table of Contents
