Placing The Cpw90; Turning The Cpw90 On Or Off; Registering The Cpw90; Registering The Cpw90 With Another Ip Phone - Verizon One Talk CP960 User Manual

Placing the CPW90

The CPW90 has rubber pads on its base to prevent it from
sliding. You can place the CPW90 on a conference table.
Do the following to ensure optimal voice quality:
• The CPW90 should placed be less than 20 meters from the
IP phones and any obstacles
• Place the CPW90 on a stable surface and keep it away from
obstacles so that it can effectively pick up sounds

Turning the CPW90 on or off

Procedure:
1. You can do the following to turn on the CPW90:
• Put the CPW90 on a charging cradle; the CPW90 starts
up automatically
• If you do not charge the CPW90, long-tap
CPW90 for three seconds. The battery LED indicator
glows solid green for one second and then goes out
2. To turn off the CPW90, long-tap
battery LED indicator on the CPW90 glows solid red for
three seconds and then goes out

Registering the CPW90

The CPW90 is a wireless expansion mic that works as an audio
input device for the CP960 IP phone. It features superior audio
technology and supports 360-degree voice pickup range at a
radius of up to 10 feet (3 meters) without any wiring troubles.
To ensure good voice quality of the calls on the IP phones, you
can register the CPW90 with the IP phone to use the CPW90
as the external audio input device.
The CPW90 can only be registered with one IP phone at a time.
If you register the CPW90 to another IP phone, the CPW90 will
deregister from the previous IP phone automatically.
Note: If you buy the CP960 wireless mic, the CPW90 is
registered with the IP phone by default.
on the
on the CPW90 until the
Procedure:
1. Navigate to Settings > Basic Settings > MIC
2. Tap to search for the CPW90
3. Turn on the CPW90
The CPW90 will enter the registration mode automatically.
The mute LED indicator on the CPW90 will fast-flash yellow.
The CPW90 registers with the IP phone automatically. If the
registration is successful, the mute LED indicator on the CPW90
will go out and the touch screen of the IP phone will prompt the
CPW90 information: battery, work time and standby time.

Registering the CPW90 with another IP phone

Procedure:
1. Navigate to Settings > Basic Settings > MIC
2. Tap to search for the CPW90
3. Put the CPW90 on the charging cradle and make sure it
is charging
4. Long-tap the Mute key on the CPW90 for five seconds.
The CPW90 will enter registration mode. The mute LED
indicator on the CPW90 will fast-flash yellow
User guide
48