Table of Contents
Advertisement
Locking your phone manually
If you have specified a timeout to lock your phone automatically,
your phone will be locked after being idle for a specified time.
You can also lock your phone manually.
Before you begin:
Make sure that the phone lock is enabled and you have set a
phone lock key.
Procedure:
1. Tap the phone lock key
2. When the phone is locked, the lock icon appears on the
phone screen
Related topics:
• Setting the phone lock
• Setting a phone lock key
Unlocking your phone
Procedure:
1. Tap the screen or tap the Mute touch key; the phone screen
prompts you to enter an unlock PIN
2. Enter the desired PIN (default: 123) in the Unlock PIN field
3. Tap OK. The lock icon disappears from the phone screen
Note: If you forget the unlock PIN, you can enter the
administrator password to unlock your phone, and then
change the unlock PIN.
Changing your phone unlock PIN
The default unlock PIN is 123. You can change it at any time for
security reasons.
Procedure:
1. Navigate to Settings > Basic Settings > Change PIN
2. Enter the desired value in the Old PIN, New PIN and Confirm
PIN fields respectively. The unlock PIN length must be
within 15 digits
3. Tap
Line keys
You can assign predefined functionalities to line keys. You can
also define a label for a line key feature that will appear
on the touch screen. Line keys allow you to quickly access
features such as recall and voice mail. The line key can indicate
a monitored status when the line keys are assigned with
particular features, such as speed dial or intercom. The default
key type of line key 1 is Line. The default key type of line keys 2
through 30 is N/A, which indicates that these keys provide no
functionality until configuration.
Topics:
• Assigning functionality to a line key
• Changing the location of the line keys
• Deleting a line key
Assigning functionality to a line key
Procedure:
1. Do one of the following:
• Tap
on the top-right of the line key line
• From the Home screen, navigate to Settings > Features >
Dsskey. Tap the desired line key
2. Select the desired key type from the Type field
3. Configure the settings for the corresponding key type.
For example, if you want a line key for intercom, configure
the Account ID, Label, Value and Extension for the line key
4. Tap
User guide
20
Advertisement
Table of Contents
