Answering An Intercom Call; Setting Intercom; Voice Mail; Setting The Voice Mail Code - Verizon One Talk CP960 User Manual

Answering an intercom call

By default, when there is an incoming intercom call, the phone
plays a warning tone and this incoming call will be answered
automatically. You can configure the behavior when receiving
an intercom call.
Topics:

• Setting intercom

• Answering an intercom call
Setting intercom
You can configure the following behavior when receiving an
intercom call:
• Intercom allow—The intercom allow feature allows the IP
phones to automatically answer an incoming intercom call.
If you disable this feature, the phone will reject incoming
intercom calls and send a busy message to the caller.
The intercom allow feature is enabled by default
• Intercom mute—The intercom mute feature allows the IP
phones to mute the microphone when incoming intercom
calls are answered automatically. Intercom mute is disabled
by default
• Intercom tone—The intercom tone feature allows the IP
phones to play a warning tone before answering an intercom
call automatically. Intercom tone is enabled by default
• Intercom barge—The intercom barge feature allows the IP
phones to automatically answer an incoming intercom call
while an active call is in progress. The active call will be
placed on hold. If you disable this feature, the IP phone will
handle an incoming intercom call like a normal incoming call
while there is already an active call on the IP phone. Intercom
barge is disabled by default
Procedure:
1. Navigate to Settings > Features > Intercom
2. Make the desired changes
3. Tap
Related topic:
Enabling call waiting
Answering an intercom call
By default, the intercom call is automatically answered on
your phone.
If your phone is set to answer intercom calls with your
microphone muted, you need to tap the Mute key to unmute
your microphone before responding to the call.

Voice mail

The voice mail feature allows you to leave voice mails for
someone or listen to your voice mail messages on your IP
phone. This feature is set up on the server side and not all
servers support this feature.
Topics:

• Setting the voice mail code

• Receiving a voice message

• Leaving voice mails
• Listening to voice mails
Setting the voice mail code
If you want to connect your phone to the message center, you
need to set the voice mail code on your phone.
Before you begin:
Get the voice mail code from your system administrator.
Procedure:
1. Tap to launch the Message application
2. Tap Set Voice Mail
3. Enter the voice mail code (for example, *4) in the desired
account field
4. Tap
Receiving a voice message
When receiving a new voice mail, the phone plays a warning
tone and the power LED indicator slowly flashes red. A
message of "n New Voice Mail(s)" ("n" indicates the number
of unread voice messages) is displayed on the phone screen.
If the voice mail prompt box disappears, it will not pop up
again unless the user receives a new voice mail or the user
re-registers the account that has unread voice mail(s).
User guide
44