Table of Contents
Advertisement
Local conference
The CP960 IP phone supports up to six parties (including
yourself) in a conference call.
There are three ways to create a conference:
• Initiating a conference by dialing multiple numbers
• Initiating a conference by inviting participants
• Merging multiple calls into a conference
The following figure shows what the phone screen looks like in
a five-way conference call:
Topics:
• Initiating a conference by dialing multiple numbers
• Initiating a conference by inviting participants
• Merging multiple calls into a conference call
• Holding/resuming a conference call
• Muting/unmuting a conference call
• Managing conference participants
• Enabling/disabling the DND mode for a conference call
Initiating a conference by dialing multiple numbers
Procedure:
1. Tap
2. Tap Call multiple members? Click here >>
3. Enter the number of the first party, then tap Add members
or select a contact from the directory or history. The avatar
of the first party appears on the top of touch screen. You
can tap the avatar to cancel the addition
4. Repeat step 3 until you add all intended parties
5. Tap
to call all intended parties at the same time
The conference is set up after the intended parties answer
the call.
Note: The value under the icon
parties you have added and the maximum number of the
parties you can add.
Initiating a conference by inviting participants
You can invite one or multiple members at a time to join
the conference.
Procedure:
1. Place a call to the first party
2. After the first party answers the call, tap Invite or tap one of
the empty round spaces
3. Do one of the following:
• Enter the number of the second party, and then tap Invite
• Repeat the step above until you add all intended parties
User guide
indicates the number of
38
Advertisement
Table of Contents
