Connecting To An Available Wireless Network Manually; Connecting To A Wireless Network Using Wi-Fi Protected Setup (Wps); Push Button Configuration (Pbc); Personal Identification Number (Pin) - Verizon One Talk CP960 User Manual

Topics:

• Connecting to an available wireless network manually

• Connecting to the wireless network using Wi-Fi Protected
Setup (WPS)

• Adding a wireless network manually

Connecting to an available wireless network manually
Before you begin:
Get the password of the wireless network from your system
administrator. Make sure that Wi-Fi mode is activated.
Procedure:
1. Navigate to Settings > Basic Settings > Wi-Fi. The phone
will automatically search for available wireless networks in
your area
2. Optional: To search available networks again, tap
then tap Scan
3. Tap the desired wireless network (SSID) to connect to it
4. If the network is secure, enter its password in the Password
field. Then, do the following:
• Tap the Show password radio box to make the
password visible
• Tap the Show advanced options radio box to configure
the HTTP proxy for the Browser application
5. Tap Connect to connect to the wireless network
Once the connection has completed successfully, the prompt
"Connected" appears under the corresponding SSID.
Related topic:
Activating Wi-Fi mode
Connecting to a wireless network using Wi-Fi
Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms
to configure secure wireless networks. WPS can automatically
configure a wireless network with a network name (SSID) and
strong Wi-Fi Protected Access (WPA) data encryption
and authentication.
Two methods are supported by IP phones in the Wi-Fi
protected setup:
• Push Button Configuration (PBC): The user simply has to
push the WPS key on both the IP phone and gateway/router
to connect
• Personal Identification Number (PIN): The user has to enter
a WPS PIN generated randomly by the IP phone on the
gateway/router to connect
and Before you begin:
Make sure that Wi-Fi mode is activated.

Push Button Configuration (PBC)

Procedure:
1. Navigate to Settings > Basic Settings > Wi-Fi
and then tap WPS. The touch screen prompts
2. Tap
"Press the Wi-Fi Protected Setup button on your router.
It may be called "WPS" or contain this symbol: "
3. Long-press the WPS key on your gateway/router
Once WPS setup has been completed, the touch screen will
prompt "Connected."

Personal Identification Number (PIN)

Procedure:
1. Navigate to Settings > Basic Settings > Wi-Fi
2. Tap and then tap WPS-PIN. The touch screen prompts
"Enter PIN XXX on your Wi-Fi router. The setup can take up
to two minutes to complete."
3. Note the PIN code
4. Log into your gateway/router's web interface and configure
it to search the clients. For more information, refer to the
documentation from the gateway/router manufacturer
Once the WPS-PIN setup has been completed, the gateway/
router's web interface will prompt success.
Adding a wireless network manually
If your gateway/router has SSID broadcast disabled, it might
not appear in the scanning results. In that case, you must
manually add a wireless network.
Before you begin:
Get the available wireless network information from your system
administrator. Make sure that Wi-Fi mode is activated.
User guide
22