Table of Contents
Advertisement
Rebooting your phone
The improper operation may cause malfunction. If the malfunction occurs, your system administrator may ask you to reboot your phone.
Procedure
1.
Go to More > Settings > Basic > Reboot > Reboot
The phone prompts you to reboot the phone or not
2.
Select OK
Resetting to factory settings
When some issues occur on your phone and you have tried all troubleshooting suggestions but still do not solve the problem, you can reset
your phone to factory configurations.
This operation will delete all your personal configuration settings, and reset all settings to the factory defaults. Check with your system
administrator if the personalized settings are kept before resetting your phone to factory set- tings.
Procedure
1.
Go to More > Settings > Advanced (default password: @N3ta!k2@2*) > Reset Config
2.
Select Reset to Factory Settings
The phone prompts you to reset the setting or not
3.
Select OK
The phone begins resetting
After reset, the screen prompts "Welcome Initializing...Please wait". The phone will be reset successfully after startup
Note: Reset of your phone may take a few minutes. Do not power off until the phone has started up successfully.
Notices
The specifications and information regarding the products in this guide are subject to change without notice. All statements, information and
recommendations in this guide are believed to be accurate and presented without warranty of any kind, express or implied. Users must take
full responsibility for their application of products.
Technical support
For additional support information please visit the One Talk support site (verizonwireless.com/support/one-talk/) for the latest guides, FAQs,
product documents and more.
Important customer information
To avoid electric shock, use caution when connecting cables. For example, do not connect safety extra-low voltage (SELV) circuits to telephone-
network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits.
Some LAN and WAN ports both use RJ-45 connectors.
To avoid electric shock, do not operate the product or connect or disconnect cables during electrical storms. To avoid electric shock, do not use
this product in or near water.
To reduce the risk of fire or overheating, keep this product in well-ventilated areas, away from radiators or other heat sources. Do not block
cooling vents.
The plug-socket combination must be accessible at all times because it serves as the main power-disconnecting device.
User guide
66
Advertisement
Table of Contents
