Camera Set; Preset Set - Ganz ZT-PTS Series Instruction Manual

OSD Menu Setting
C. Camera Set
COLOR MODE
INVERS MODE
D-ZOOM
AGC MODE
AGC MAX LEVEL : x1.5
T-RANGE MIN
T-RANGE MAX
CALI. MODE
CALI. INTERVAL
EXIT
C-1. CAMERA SET - COLOR MODE
Possible to set up the color mode 4 in total (B/W, RAINBOW, IRON,
GLOWBOW)
C-2. CAMERA SET - INVERSE MODE
For reversal the COLOR. [ON/OFF]
C-3. CAMERA SET – D-ZOOM
As Digital ZOOM, on setting, it should be operated for 4 times.
C-4. CAMERA SET – AGC MODE
As AUTO GAIN Control Mode, on setting, you can control the GAIN with MAX
LEVEL.
C-5. CAMERA SET – AGC MAX LEVEL
On setting the AGC MODE, you can set up the Max Gain Level. 5 stages is
available in total. ( x1, x1.5, x2, x2.5, x3)
C-6. CAMERA SET – T-RANGE MIN
For setting minimum temperature when AGC is off. Degree is available
-20~120℃.
C-7. CAMERA SET – T-RANGE MAX
For setting maximum temperature when AGC is off. Degree is available
-20~120℃.
C-8. CAMERA SET – CALI. MODE
For setting Calibration Mode. You can set it up 3 modes. (AUTO / INTERVAL /
MANUAL)
C-9. CAMERA SET –CALI. INTERVAL
On setting the Calibration Mode into INTERVAL MODE, possible to set up the
fixed Calibration period. Time is 10~3600sec. available.
ZT-PTS SERIES

CAMERA SET

: B/W
: OFF
: OFF
: ON
: 020℃
: 045℃
: AUTO
: 600SEC
024
OSD Menu Setting
D. Preset Set
PRESET NO
PRESET ID
PAN : XXX.X
SAVE
EXIT
D-1. PRESET - PRESET NO
Up to 165 preset positions are available.
Use the joystick or pan left / right keys to select the number.
D-2. PRESET - PRESET ID
To create preset titles use the joystick or pan left / light keys to navigate the
menu.
The ZOOM TELE button moves to the next character from left to right and
ZOOM WIDE button moves to the next character from right to left. (Space
displays when □ appears.)
D-3. PRESET - PAN : XXX.X TILT : XX.X
Preset FOCUS FAR button in order to set preset position then, use the
joystick or pan left / right keys to the position where memorized preset
number is needed.
Then press FOCUS FAR button again after setting a preset location.
D-4. PRESET - SAVE
Move the joystick right or press the pan right key when the cursor is at SAVE
and then the cursor will be located on Preset ID for the continuous preset
No. setting.
D-5. PRESET – EXIT
To escape this page, move joystick to the right direction.
ZT-PTS SERIES

PRESET SET

: 01
: PRESET 01
TITL : XX.X
025