Table of Contents
Advertisement
OSD Menu Setting
C. Camera Set
C-1. CAMERA SET - FLICKERLESS
The flickerless feature has options of 50Hz and 60Hz.
The default setting is OFF (NTSC : 60Hz / PAL : 50Hz).
The flickerless mode only needs to be set when there is a mismatch between the power frequency
and camera sync rate. The default setting is OFF.
C-2. CAMERA SET - SHUTTER
It is for set up the Shutter Speed of camera.
•Default value is Auto and it can be changed into other one using the Joystick Left/Right of
Controller.
- Change to turn : Full Auto → Manual
- Auto : Changed according to light level automatically.
- Manual : It can be changed into other one using the Focus Far Key of
controller and on ON the DSS (Digital Slow Shutter), it should be set up 1/1 to 1/10,000, on OFF,
1/50(1/60)~1/10,000.
C-3. CAMERA SET - APERTURE
Aperture correction enhances the picture details and sharpness by increasing the gain of the
camera. Increase the value to sharpen the image, decrease to soften it the default setting is 10.
(The aperture level is from 01 ~ 15.)
C-4. CAMERA SET - D ZOOM
Digital zoom is enabled to apply when the zoom lens has reached its maximum optical zoom in
capability. The default setting is OFF.
OSD Menu Setting
C-5. CAMERA SET - WB MODE
Advertisement
Table of Contents
