Related Manuals for Ganz ZC-DN3048PHA
Summary of Contents for Ganz ZC-DN3048PHA
-
Page 1: Instruction Manual
MINI DOME CAMERA ZC-DN3000 SERIES INSTRUCTION MANUAL Day & Night High-resolution ZC-DN3048PHA EG-1 Page 1 03.10.6, 3:36 PM (EG)D3048/563PAL Adobe PageMaker 6.5J/PPC... -
Page 2: Table Of Contents
Thank you for your purchase of this product. Before operating the product, please (1) Use only 24V AC power supply marked class 2 or +12V DC regulated power read this instruction manual carefully to ensure proper use of the product. Please supply marked class 2. -
Page 3: Parts Description
PARTS DESCRIPTION • Exterior Inner cover • Camera body interior Camera body View angle Focus adjustment adjustment lever lever Camera Lens B/W Mode-Fix terminal Line phase adjustment Dome cover volume Body cover Coaxial Power video cable input Video output terminal •... -
Page 4: Installation & Adjustment
INSTALLATION & ADJUSTMENT Creating a Hole in the Ceiling or Wall Connecting the Cables Make two holes for the screws affixing the camera body, and one hole for the Please refer to the diagrams below. ① Connect the video cable from monitor to the equipped video cable. power and video cables. - Page 5 Attaching the Service Monitor Adjusting the View Angle, Focus and Iris When adjusting the camera direction, view angle and focus, use the included Use the lever to adjust the view angle and focus. service monitor cable by connecting to the video output connector View angle adjustment lever (Lock screw) •...
- Page 6 Line Phase Adjustment DIP Switch Set Up (24V AC 50Hz, Line Lock mode) Set according to lighting conditions. Attention: DO NOT change “FIX” switch position from the factory setting. If necessary, turn the volume to adjust the line phase. Factory Setting Do not change the switch position from the factory setting.
- Page 7 Other important precautions pertaining to the Day/ B/W Mode-Fix terminal Night function The picture mode can be fixed at B/W by shorting the two contacts on the B/ W Mode-Fix terminal (See the figure below for details). Fixing the picture mode at B/W can prevent the picture from having an optical oscilla- ①Focus adjustment must be made in Colour (=Day) mode.
-
Page 8: Specifications
SPECIFICATIONS Tokyo, Japan www.GANZ.jp 042-1.0 EG-8 Page 8 03.10.6, 3:36 PM (EG)D3048/563PAL Adobe PageMaker 6.5J/PPC...
Need help?
Do you have a question about the ZC-DN3048PHA and is the answer not in the manual?
Questions and answers