Making Required Connections To The Server Board - Intel SE7501BR2 Installation And Integration Manual

Making Required Connections to the Server Board

Make these connections regardless of the chassis used. Refer to your chassis documentation
for additional connection requirements.
Intel SC5200 Server Chassis Base Version:
• Connect the front system fans to the system fan connections 3 and 4
on the server board.
Intel SC5200 Server Chassis Hot-Swap, Redundant Power Version:
• Be sure to attach each system fan to its correspondingly numbered
connector on the server board. System fan numbers are printed on the
front and rear fan holders.
A Auxiliary Power
B Main Power
C CPU1 Fan
D CPU2 Fan
E Processor Power
F ATA 100 IDE
18
Intel Server Board SE7501BR2 Installation and Integration Guide
G System Fan 3 (lower connection) and
System Fan 4 (upper connection)
H Front Panel
I Chassis Intrusion
J Floppy Disk Drive
K System Fan 1 (upper connection) and
System Fan 2 (lower connection)