Introduction; Chapter Outline; Server Board Use Disclaimer - Intel SR2612UR Product Specification

Intel® Server System SR2612UR TPS
1.

Introduction

This Technical Product Specification (TPS) provides system-specific information detailing the
features, functionality, and high-level architecture of the Intel
can also reference the Intel
greater detail of functionality and architecture specific to the integrated server board and learn
about what is supported on this server system.
In addition, you can obtain design-level information for specific subsystems by ordering the
External Product Specifications (EPS) or External Design Specifications (EDS) for a given
subsystem. EPS and EDS documents are not publicly available. They are only made available
under NDA with Intel and must be ordered through your local Intel representative. Refer to the
Reference Documents section at the end of this document for a complete list of available
documents.
®
The Intel Server System SR2612UR may contain design defects or errors known as errata,
which may cause the product to deviate from published specifications. Refer to the Intel
®
Board S5520UR/Intel
1.1

Chapter Outline

This document is divided into the following chapters:

Chapter 1 - Introduction

Chapter 2 - Product Overview

Chapter 3 - Power Subsystem

Chapter 4 - Cooling Subsystem

Chapter 5 - System Board Interconnects

Chapter 6 – Peripheral and Hard Drive Support

Chapter 7 - Control Panel

Chapter 8 - PCI Riser Cards and Assembly

Chapter 9 - Environmental Specifications

Chapter 10 - Regulatory and Certification Information

Appendix A: Integration and Usage Tips

Appendix B: POST Code Diagnostic LED Decoder

Appendix C: POST Code Errors

Glossary

Reference Documents
1.2

Server Board Use Disclaimer

Intel Corporation server boards support add-in peripherals and contain a number of high-
density VLSI and power delivery components that need adequate airflow to cool. Intel ensures
through its own system development and testing that when Intel server building blocks are used
together, the fully integrated system will meet the intended thermal requirements of these
components. It is the responsibility of the system integrator who chooses not to use Intel-
developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of air flow required for their specific application and environmental
conditions. Intel Corporation cannot be held responsible if components fail or the server board
does not operate correctly when used outside any of their published operating or non-operating
limits.
Revision 1.3
®
Server Board S5520UR Technical Product Specification to obtain
Server System SR2612UR Specification Update for published errata.
Intel order number E76293-003
®
Server System SR2612UR. You
Introduction
®
Server
1