Troubleshooting Guide; Minimum Hardware Requirements - Intel SE7501BR2 Installation And Integration Manual

Troubleshooting Guide

In the unlikely event you do encounter issues, the troubleshooting guide will help you
troubleshoot and identify possible areas of concern regarding the Intel SE7501BR2 Server
Board. It will also assist you in collecting the data needed to help you work through any
concerns or issues that may arise The troubleshooting guide includes suggestions that may
help you and a list of information that we will need to assist you should you need to call.
The troubleshooting guide is available at:
http://support.intel.com/support/motherboards/server/SE7501BR2/tsg.htm
If you are unable to resolve a problem using this guide, please follow these steps:
1. Visit http://support.intel.com/support/motherboards/server/SE7501BR2. This Web site
contains the latest information on known issues and their respective solutions. If you are
still unable to resolve the issue, go to the next step.
2. Send e-mail including as much information on the issue as possible to Intel customer
support using the form available at this URL:
http://supportmail.intel.com/scripts-emf/welcome.asp?id=37
3. Channel Customers can contact Intel customer support toll free at 1-866-655-6565.
Non-channel customers should use one of the numbers listed at
http://www.intel.com/support/9089.htm

Minimum Hardware Requirements

Your system must meet the following minimum requirements to avoid integration difficulties
and possible board damage:
• Processor: Minimum of one 1.8-GHz Intel Xeon processor with 512K cache support in
a 603-pin (400-Mhz FSB) or 604-pin (533-Mhz FSB) INT Flip-Chip micro Pin-Grid
Array (INT-mPGA). For a list of tested processors, visit
http://support.intel.com/support/motherboards/server/se7501br2/supp_proc.htm
•
Memory: Minimum of two identical 128-MB ECC DDR 266-compliant registered
SDRAM 168-pin gold DIMMs. For a list of tested memory, visit
http://support.intel.com/support/motherboards/server/se7501br2/tested_mem.htm
•
Power: Minimum of 450W with 1.2A standby current which meets the SSI EPS 12V
specification. Intel provides a power budgeting tool to help you determine the power
needs of your server at
http://support.intel.com/support/motherboards/server/pwr_budget.htm
Additional resources and support for your server board, including tested chassis, qualified
chassis components, specifications, and software updates, can be found at
http://support.intel.com/support/motherboards/server/SE7501BR2
6
Intel Server Board SE7501BR2 Installation and Integration Guide