Instruction manual Primus 25 advanced®
5.3 RUN INCUBATION
The Primus 25 advanced® may be used as incubator with the INCUBATION function. Choose the de-
sired temperature (INCUB) and switch the lid heating on or off (LIDHT). The current temperature, the
status of the lid heating and the total time are displayed. Use the Stop/Esc key to exit the INCUBATION
function.
5.4 MODE/EDIT/UTILS
With this menu option you can edit and review all programming and operating functions.
5.4.1 PROGRAM
With the submenu PROGRAM programs may be created and changed..
5.4.2 VIEW
With the VIEW option, an overview of the stored programs may be viewed without risking an accidental
alteration of the data. The GLP report of the last program run can be viewed on the display. Information
about setup, system, and block are available here.
5.4.3 PRINT
With the PRINT menu programs, program lists, GLP reports and equipment information may be printed
via the parallel printer interface.
5.4.4 SETUP
The basic setup of the Primus 25 advanced® is entered via SETUP. To enter the time and date use
CLOCK. If several Primus thermal cyclers are connected via the lab bus (RS485), enter the machine's
address here.
PEQLAB_v0314_E
5