Indicators On The Drives - Fujitsu PRIMERGY H250 Manual

Server system
Hide thumbs Also See for PRIMERGY H250:
Table of Contents

Advertisement

The Control Panel
Voltage
Warning
indicator
indicator
(green LED)
(yellow LED)
ON
ON
OFF
BLINKING
Table 2: LED display modes
4.2.4

Indicators on the Drives

CD-ROM Drive Indicator
lights up when the CD-ROM drive is being accessed.
Floppy Disk Drive Access Indicator
lights up when the floppy disk drive is being accessed.
Hard Disk Drive Indicators
Hard disk drive
lights green when the drive in this module is being accessed.
Drive error (only in conjunction with a RAID controller)
lights orange when the drive is defective and needs replacing, or if the
module is not correctly inserted.
flashes orange when a rebuild is carried out by the RAID controller
after changing a hard disk drive.
50
Preparation for use and operation
Status description
Warning status
A board is installed in this slot. The board is
connected to the power supply but is not in
operation. Check the board, slot or drivers.
Ready to exchange
Hot fix is removed.
U41271-J-Z156-2-76

Advertisement

Table of Contents
loading

Table of Contents