The Server Switches Itself Off; The Monitor Remains Dark - Fujitsu PRIMERGY H250 Manual

The Server Switches itself OFF

7.2 The Server Switches itself OFF
Server Management has Detected an Error
Ê In the ServerView programme, check the error list or check the error log file
using the SCU utility, and attempt to eliminate the error.
7.3

The Monitor Remains Dark

Monitor is Switched OFF
Ê Switch your monitor ON.
Power Saving Has Been Activated (Screen is Blank)
Ê Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver). Enter the appropriate password.
Brightness Control is Set too Dark
Ê Adjust the brightness control to increase the brightness. For detailed infor-
mation, please refer to the operating manual supplied with your monitor.
Power Cable or Monitor Cable not Connected
Ê Switch OFF the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and to
the power socket.
Ê Check whether the monitor cable is properly connected to the server and
monitor (if it is connected with a plug). If a separate graphics card is installed
in the server, then the monitor cable must be connected to the connection
on this graphics card.
Ê Switch ON the monitor and the server.
64
Problem Solutions and Tips
U41271-J-Z156-2-76