Installing the Server
3.5
Installing the Server
Figure 16: Fitting the server in the rack
Ê Lift the server onto the two projecting telescope bars. Make sure that the two
metal noses (1) protrude over and grip the bars.
Ê Position the server so that the holes of the telescope bars are in line with
those of the server. When doing this, ensure that the telescope bars are kept
in a locked position.
Ê Secure the telescope bars to the server using three screws (left and right).
Figure 17: Telescope bar with safety spring
Ê Press in the safety springs (1) on both telescope bars.
38
1
U41271-J-Z156-2-76
Installation