Repair And Calibration; Technical And Sales Assistance - AEMC Simple Logger II Series User Manual

Trms clamp-on, ac current, ac voltage, dc current, dc voltage, thermocouple, temp/rh, event logger

Hide thumbs Also See for Simple Logger II Series:

Table of Contents

Repair and Calibration

To ensure that your instrument meets factory specifications, we recommend

that it be sent back to our factory Service Center at one-year intervals for reca-

libration, or as required by other standards or internal procedures.

For instrument repair and calibration:

You must contact our Service Center for a Customer Service Authorization

Number (CSA#). This will ensure that when your instrument arrives, it will be

tracked and processed promptly. Please write the CSA# on the outside of the

shipping container. If the instrument is returned for calibration, we need to

know if you want a standard calibration, or a calibration traceable to N.I.S.T.

(Includes calibration certificate plus recorded calibration data).

Ship To:

(Or contact your authorized distributor)

Cost for repair, standard calibration, and calibration traceable to N.I.S.T. are

available.

NOTE: You must obtain a CSA# before returning any instrument.

If you are experiencing any technical problems, or require any assistance

with the proper operation or application of your instrument, please call, fax or

e-mail our technical support team:

Contact:

Simple Logger

II Series

GlobalTestSupply

www.

.com

Find Quality Products Online at:

sales@GlobalTestSupply.com

Table of Contents

Do you have a question about the Simple Logger II Series and is the answer not in the manual?