Logger Operation; Recording With Memory Cleared; Recording With A Partial Or Full Memory - AEMC Simple Logger II Series User Manual
Trms clamp-on, ac current, ac voltage, dc current, dc voltage, thermocouple, temp/rh, event logger
Hide thumbs
Also See for Simple Logger II Series:
- Quick start manual (8 pages) ,
- User manual (36 pages)
Table of Contents
Advertisement
Find Quality Products Online at:
4.8
Logger Operation
When the instrument is in STANDBY mode, the following occurs (provided
there is sufficient battery voltage and no data is stored in the instrument's
memory):
•
The GREEN LED single-blinks every 5 seconds. (STANDBY
mode is active and the logger is not recording).
•
The RED LED is OFF, indicating there is no data in memory.
•
The PRESS button is used to Start/Stop a Recording Session.
•
If the PRESS button is not pressed for a period of one minute,
the instrument will enter SLEEP mode and wait for either another
button press or the recording start time to arrive (if a recording is
scheduled). While in SLEEP mode, the LEDs will not blink.
•
A button press of 0.5 second will return the unit back to the normal
STANDBY mode.
4.8.1
Recording with Memory Cleared
When a recording starts, the logger will continue to record until one of the
following occurs:
•
The session is complete.
•
The memory is full and the recording mode is Start/Stop or Alarm.
•
The PRESS button is pushed until the STOP (ORANGE) LED
lights up and is released before the next LED lights.
•
The Stop Recording command from the Simple Logger II Control
Panel is sent to the unit.
•
The battery voltage falls below 1.7V.
4.8.2
Recording with a Partial or Full Memory
If the RED LED is double-blinking every 5 seconds, the memory is full and
must be erased before any further recording can be performed.
If the RED LED is single-blinking every 5 seconds prior to starting a new
recording session, the memory is partially full.
To save, clear, or check memory availability, use the Simple Logger II Con-
trol Panel software.
There may be instances where the GREEN LED is also double-blinking
every five seconds indicating that the logger is still recording. The user
can choose to stop the recording session and download the session and/
or erase the memory.
32
GlobalTestSupply
www.
Simple Logger
®
II Series
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
Need help?
Do you have a question about the Simple Logger II Series and is the answer not in the manual?