Setting The Number Of Rings; Setting The Voice Quality - Swisscom Pronto 32i Manual

20.5.99

Setting the number of rings

AM menu

Setting the voice quality

AM menu
KAP12.FM5
You can set the number of times the telephone should
ring before the call is answered by the answering ma-
chine.
Activate the answering machine menu.
<>
5=settings?
o and
With password protection (
?
word.
<>
2=number of calls?
The number of rings set is shown in the upper display
line.
Select the desired number of rings (1, 2, 4 or 6) or "Auto
and
<> ?
2/4". The default setting is 4 rings.
If you select "Auto 2/4", the number of rings depends on
whether new messages are stored. If new messages
have been received, the answering machine answers the
call after two rings, otherwise it waits for four rings. This
setting is particularly useful if you are checking your an-
swering machine remotely as the number of rings indi-
cates whether there are new messages or not. You thus
have the option of hanging up after two rings without in-
curring any charges (
You can switch between two different voice qualities
when recording an announcement:
Normal voice quality (compressed)
High voice quality (uncompressed – higher memory
requirement).
Activate the answering machine menu.
<>
5=settings?
o and
With password protection (
?
word.
? >
5=voice quality?
The voice quality is switched.
Pronto 32i, englisch: A30853-X300-F507-1-7619
Answering machine
?
page 14): Enter the pass-
?
page 79).
?
page 14): Enter the pass-
? >
1=change?
?
77