Forwarding Calls; Call Forwarding - Swisscom Pronto 32i Manual

20.5.99

Forwarding calls

Call forwarding

KAP10.FM5
For each directory number of your telephone, you can for-
ward calls to another telephone.
For this feature you must apply to your local Telecom
branch. Your telephone must be configured accordingly.
Inquire about the respective charges.
There are 3 forwarding modes:
Immediately: The call is forwarded immediately, no
signal.
Deferred: The call is forwarded after 20 seconds.
If busy: The call is forwarded if the line is busy.
Several forwarding modes can be active for each Multiple
Subscriber Number (MSN) (e.g. the "if busy" forwarding
number may be different to the "deferred" number).Pro-
gramming and activating call forwarding for MSN 1–3
MSN 1 to MSN 3 are intended for Pronto 32i; in this case
only the telephone service is rerouted. Connection re-
quests with different service identifiers, e.g. data or fax,
are not forwarded.
Select "Forwarding?" and confirm.
and
<> ?
and Select the directory number which is to be forwarded and
<> ?
confirm. (=on): Forwarding is only activated for this
number.
Select forwarding mode "immediately", "deferred" or "if
and
<> ?
busy" and confirm.
The last call forwarding number is prompted.
The number can be deleted by backspacing with
edited with
? Confirm.
Call forwarding is active.
The CO does not support the new protocol if
you cannot initiate call forwarding. Plans are un-
derway to introduce the new protocol onto the
public network. This depends, however, on the
configuration of the local CO. Call forwarding
can be programmed with key sequences (key-
pad protocol), activated/deactivated and dis-
played.
Pronto 32i, englisch: A30853-X300-F507-1-7619
Forwarding calls
o
.
and
<
53